iFlight ih3 build log
This is version 1 with 1407 – i’m still waiting for the Emax 1306b motors to get below the 250g mark and will update this […]
Build Logs
3inch is the new 5inch
Jeder baut gerade einen 3inch Racer, dafür gibt es viele Gründe weil die kleinen wirklich super fliegen und man bekommt die ganz locker unter die […]
GEPRC Sparrow V1 Facelift
So, my old GEPRC Sparrow V1 3 inch kwad becomes a faclift. Original with a F3 Flight Control, a strange, never to understand VTX, how […]
FlyWoo Vampire 230mm
this 5 inch frame attracted my interest as its only 70 grams of weight (verified). It has 5mm thick arms with narrow surface and a […]
building a long range kwad – iFlight XL7 Lowrider frame
after some awesome mid range adventures with my Minibigger 7 inch build my thoughts went on how to improve range, efficiency and picture quality. As […]
Chorus RF Laptimer – 4in1
Ein gut funktionierendes Timing System, das ganze dann auch noch im Low-Cost Bereich … Gibt es so etwas, kurz gesagt “JA” Andrey Voroshkov hat es […]
Arrow VX140
Did another 3 inch build – this time a little 140mm racer with 4mm thick separate arms. The Arrow VX140 is a stretch-X rocket that […]
Xaok’s Minibigger 7 inch long range setup
This build is intended for mid/long range fpv flights. Next to an efficient power train setup a GPS module and long range radio link setup […]
Diatone R5S – Featherweight
Diatone R5-S HGLRC F438-Flytower Runcam Eagle Micro DYS Samguk WU 2296 2700KV Radiolink R12DSM 2.4G 12CH DAL 5×4.6×3 Cyclone Weight: 275g (no Lipo)
GEPRC LX 6 – the big Leopard
This build started as a midrange plan but somehow got to a fast nearly mid range poser quad. Had to choose that nice GEPRC Leopard […]
building a long range 7 inch kwad – Diatone R7
” order_by=”sortorder” order_direction=”ASC” returns=”included” maximum_entity_count=”500″]
replacing the broken Realacc Purple 150 frame with GepRC 130X
after a failed dive into deep frozen ground my Realacc Purple 150 frame gave up. 2 broken arms. loved that frame for its nice look […]